 | +5 V output, Magnetic card reader support |
 | -55°C to 125°C temperature range monitoring |
 | 1-wire and RS232/RS485 communication interfaces |
 | 1-wire DS18B20 protocol |
 | 1-Wire® interface to monitor temperature data and RFID/iButton tags |
 | 5 configurable buttons |
 | 8 meters long cable |
 | Accurate fuel level and temperature monitoring via LLS sensors |
 | Advanced solution which reads more than 100 parameters |
 | Alarm button immediately sends notification in case of emergency |
 | All devices come pre-registered |
 | All liquid material supported |
 | All the necessary information and power source from one connector |
 | Allows device to disconnect from external power and work from internal battery |
 | Allows device to limit vehicle speed |
 | Allows device to work without external power source |
 | Allows reading CAN bus data from vehicle ECU |
 | Allows reading CAN bus data from vehicle ECU via Bluetooth |
 | Anti-theft solution and stolen vehicle recovery |
 | Automatic failover switch between multiple internet sources for highest reliability cases |
 | Bluetooth for external devices and Low Energy sensors |
 | Built-in accelerometer for accurate crash trace data |
 | CAN data reading and control of electric vehicles |
 | CAN data reading from agriculture and special transport* |
 | CAN data reading from agriculture transport |
 | CAN data reading from buses and coaches |
 | CAN data reading from electric vehicles |
 | CAN data reading from light vehicles |
 | CAN data reading from light vehicles, buses, coaches and trucks |
 | CAN data reading from special transport |
 | CAN data reading from trucks |
 | CAN data reading from vehicles and specialized transport |
 | Certified AIS40 with IRNSS |
 | Classifies the degree of protection against solid objects and water |
 | Classifies the degree of protection against solid objects and water |
 | Classifies the degree of protection against solid objects and water |
 | Classifies the degree of protection against water |
| Classifies the degree of protection against water and dust |
 | Compact size, easy integration |
 | Configurable DIN/AIN for flexible remote monitoring and control |
 | Contactless CAN BUS connectivity |
 | Crash detection functionality working according accelerometer data |
 | Device support both 3G and 4G connectivity |
 | Device support both LTE M1 and NB IoT connectivity |
 | Digital Input/Output for remote monitoring and control |
 | Download tachograph files without ignition being turned on |
 | Driver notification on events |
 | Driving behaviour monitoring by GNSS or accelerometer data |
 | Dual SIM – significantly reduce roaming costs |
 | Easily get basic parameters such as mileage, fuel level, etc. |
 | Easily get basic parameters such as mileage, fuel level, etc. |
 | Easy configuration with dedicated mobile application only via NFC |
 | Easy to install without drilling holes |
 | Easy to use |
 | Eco driving score |
 | Enhanced processor |
 | Events transfer to the server |
 | External antenna used for Iridium connectivity |
 | External GNSS antenna extends mounting options |
 | External voltage range |
 | External voltage range |
 | Find your vehicle‘s location on your smartphone |
 | Firmware and configuration update |
 | FMS and Tachograph data from the vehicle |
 | Free Android App enables handy access on the move |
 | Get DDD files and live Tachograph data remotely |
 | GNSS positioning with geofencing functionality |
 | History of actions with devices |
 | Ignition detection (sleep mode) |
 | Ignition detection and power source |
 | Impulse inputs for fuel flow meters data reading |
 | Increase the number of possible use cases |
 | Innovative click type two-phase casing closing |
 | Integrated Buzzer |
 | Limited protection against dust ingress. Protected against splash water from any direction |
 | Long battery life time, up to 5 years |
 | Long transmission range, up to 500 meters (open field) |
 | LTE Cat 1 for M2M/IoT communications |
 | LTE Cat 4 with speeds up to 150 Mbps |
 | Man-down feature. Used to detect fall down event |
 | Multiple device configuration/updates |
 | Negative input will allow easier installation of accessories |
 | No tools for closing and opening required |
 | No violation on manufacturer warranty |
 | OBD OEM parameters (PIDs) – Real odometer and fuel level |
 | Periodic photo sending |
 | Plug and play installation - simply plug in the device and start tracking |
 | Power Off Sleep Mode reduce the power consumption to less than 1 mA |
 | Power Supply of 10-90 V allows to install tracker into Electric Vehicles |
 | Real time fuel consumption monitoring (precision measurement) |
 | Real time fuel theft monitoring |
 | Real time notifications. Unified across platforms |
 | Reliable 4G (LTE Cat M1) connection with fallback to 2G network |
 | Reliable 4G connection with fallback to 3G network |
 | Remote door lock control |
 | Remote tachograph data download |
 | Review your vehicle‘s trip history |
 | RGB LED and buzzer for user notifications according to selected scenario |
 | RS232 is an industrial standard for serial communication |
 | RS232/RS485 serial communication interfaces |
 | RS485 - industrial differential serial communication |
 | Set-up easily without disassembling vehicle dashboard panel |
 | Simplified maintenance and diagnostics |
 | Standard and U-type cables available |
 | Support LTE Cat 6 up to 300 Mbps |
 | Supported vehicles and data list |
 | Transfer data to server via Iridium satellite network |
 | Two - way voice communication |
 | Use with 12- and 24-Volt tachographs |
 | Video by crash event |
 | Video by Digital Input event |
 | Video recording |
 | Video/photo by request |
 | Waterproof stainless steel casing |
 | Wide range of power supply voltages |
 | Wide range of power supply voltages for simpler integration |
 | Wide temperature range of -80°C to 200°C, for COVID-19 vaccines use cases |
 | Wireless and hassle-free device installation |
 | Worldwide 3G network coverage |