FMS Cable

FMX640 power cable with special heavy duty FMS connector

fms-tachograph

FMS and Tachograph data from the vehicle

ignition-source-power

Ignition detection and power source

easy-instalation

All the necessary information and power source from one connector

manufacturer-warranty

No violation on manufacturer warranty

Description icon Description
Features icon Features
Downloads icon Downloads
Ordering icon Ordering

Description

Cable is a standardized heavy duty vehicle FMS 12-pin connector, for connecting FMX640 with one plug and receiving vehicle information through CAN line and K-line, along with powering the device and getting Ignition detection. This ensures easier connection and does not violate the factory warranty

fms-cable-scheme.jpg
  1. Behind the Fuse panel on passenger side – for Example SCANIA S/R/G/P Euro6 Series:
one-pic.jpg
  1. Near the Fuse panel on passenger side – for example DAF XF Euro6:
two-pic.jpg
  1. Behind the Radio on lower deck – for example Volvo FH Euro5 and Renault T Euro6:
three-pic.jpg
  1. Behind the Tachograph on upper deck – for example Mercedes Actros MP5 Euro6:
four-pic.jpg

Features

TECHNICAL DATA
Supported devicesFMB640/FMM640/FMC640/FM6300
Number of pins12
PinoutPin12: VDC
Pin1: GND
Pin6: CAN H
Pin9: CAN L
Pin10: Ignition
Pin7: K-line
Supported protocolsFMS/K-Line
Length0.9 meter

Ordering