RS232/RS485 serial interfaces for fuel monitoring and other external data reading
Dual SIM considerably reduces roaming costs
Impulse input for fuel flow meters data reading and accurate fuel usage control
Connecting via RS232 to get videos and pictures of the events that might happen on the road or inside a vehicle
Name
FMC125-MBIB0: MeiG SLM320-E with Teltonika TM2500
FMC125-MCIB0: MeiG SLM320-LA with Teltonika TM2500
Technology
LTE(CaT1)/2G(GSM/GPRS)/GNSS/BLUETOOTH® LE
GNSS
GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS
Receiver
33 tracking channel
99 acquisition channel
Tracking sensitivity
-165 dBM
Position Accuracy
< 2.5 m CEP
Velocity Accuracy
< 0.1 m/s (within +/- 15% error)
Hot start
< 1 s
Warm start
< 25 s
Cold start
< 35 s
Technology
LTE Cat 1, GSM
2G bands
FMC125-MBIB0: GSM: B2/B3/B5/B8
FMC125-MCIB0: GSM: B2/B3/B5/B8
4G LTE bands
FMC125-MBIB0: LTE FDD: B1/B3/B7/B8/B20/B28 LTE-TDD:B38/B40/B41
FMC125-MCIB0: LTE FDD: B1/B2/B3/B4/B5/B7/B8/B20/B28 LTE-TDD:B40
Data transfer
LTE: LTE FDD: Max 10Mbps (DL)/Max 5Mbps (UL)
LTE TDD: Max 8Mbps (DL)/Max 2Mbps (UL)
GSM: GPRS: Max 85.6Kbps (DL)/Max 85.6Kbps (UL)
Data support
SMS (text/data)
Input voltage range
10 - 30 V DC with overvoltage protection
Internal Back-up battery
170 mAh Li-Ion battery, 3.7 V (0.63 Wh)
Power consumption
At 12V < 4 mA (Ultra Deep Sleep)
At 12V < 6 mA (Deep Sleep)
At 12V < 12 mA (Online Deep Sleep)
At 12V < 19 mA (GPS Sleep)
At 12V < 36 mA (nominal with no load)
At 12V < 1A Max. (with full Load / Peak)
RS485 input voltage range on A or B pin (common-mode voltage)
-7V to +12V
RS232 input voltage range (common-mode voltage)
+/-15V
RS232 input voltage range (maximum operational voltage)
+/-25V
Specification
4.0 + LE
Supported peripherals
Temperature and Humidity sensor, OBDII dongle, Inateck Barcode Scanner, Universal Bluetooth® LE sensors support
Dimensions
65 x 56,6 x 20,6 mm (L x W x H)
Weight
55 g
Operating temperature (without battery)
-20 °C to +85 °C
Storage temperature (without battery)
-20 °C to +85 °C
Operating temperature (with battery)
-20 °C to +40 °C
Storage temperature (with battery)
-20 °C to +40 °C
Operating humidity
5% to 95% non-condensing
Ingress Protection Rating
IP41
Battery charge temperature
0 °C to +45 °C
Battery discharge temperature
-20 °C to +60 °C
Battery storage temperature
-20 °C to +45 °C for 1 month
-20 °C to +35 °C for 6 months
Digital Inputs
2
Digital Outputs
1
Analog Inputs
1
CAN Adapter Inputs
1
1-Wire
1
RS232
1
RS485
1
GNSS antenna
Internal High Gain
Cellular antenna
Internal High Gain
USB
2.0 Micro-USB
LED indication
2 status LED lights
SIM
2x SIM Card (Dual-SIM)
Memory
128MB internal flash memory
Sensors
Accelerometer
Scenarios
Green Driving, Over Speeding detection, GNSS Fuel Counter, DOUT Control Via Call, Excessive Idling detection, Immobilizer, iButton Read Notification, Unplug detection, Towing detection, Crash detection, Auto Geofence, Manual Geofence, Trip, Jamming detection (Jamming detection supported with SLM320-E and SLM320-LA modules)
Sleep modes
GPS Sleep, Online Deep Sleep, Deep Sleep, Ultra Deep Sleep
Configuration and firmware update
FOTA Web, FOTA, Teltonika Configurator (USB, Bluetooth® wireless technology)
SMS
Configuration, Events, DOUT control, Debug
GPRS commands
Configuration, DOUT control, Debug
Time Synchronization
GNSS, NITZ, NTP
Fuel monitoring
LLS (Analog), Digital LLS (RS232, RS485), LV-CAN200, ALL-CAN300, CAN-CONTROL, OBDII dongle
Ignition detection
Digital Input 1, Accelerometer, External Power Voltage, Engine RPM (CAN Adapters, OBDII dongle)
RS232 Modes
Log Mode, NMEA, LLS, LCD, RFID HID/MF7, Garmin FMI, TCP ASCII/Binary, Satellite Backup (Iridium Edge)
RS485 Modes
Log Mode, NMEA, LLS, TCP ASCII/Binary
Regulatory
CE / RED, UKCA, E-Mark, EAC, RoHS, REACH, Declaration of IMEI assignment, CITC, RCM, JATE, TELEC, SIRIM QAS, TRC, TRA, SIRA, ICASA, Anatel, NTC, NBTC, Iridium certification
Standard package contains
Standard order codes
Custom order codes
Sophisticated remote device management solution with multilevel account hierarchy. Create smart groups and schedules to automate firmware and configuration update.